Esqui

PREPARING THE PROTECTION PRODUCT FOR IMPLEMENTATION:
The plant protection product calculated over the recommended dose is first mixed with some water in a separate container. The tank of the sprayer is filled halfway with water. While the mixer of the machine is in operation, the prepared mixture is added to the tank. Continuing to mix, the tank is completed with water. The mixing process is continued until the application is completed. The amount of water to be used per decare should be 20-40 liters and fan jet nozzles should be used in applications. Applications should be made at cool times of the day, in windless or slightly windy weather conditions. Use the prepared mixture on the same day.

CALIBRATION:
Before the application, the sprayer must be calibrated. In order to determine the amount of water to be used per decare, the tank of the sprayer is filled with water. How much area is wetted with this water is determined and the amount of water to be used in the application is calculated.

CLEANING THE SPRAYING MACHINE:
Immediately after the completion of the application, safely empty the tank of the sprayer. After filling the tank with clean water, run the mixer and spray system to ensure that all parts are washed. Do not wash near water sources. Do not discharge washing water and waste into water sources.

USAGE OF THE PLANT PROTECTION PRODUCT:
ESQUI® enters weeds through their roots. It is carried acropetally through the xylem. It is a systemic herbicide used against narrow and broad-leaved weeds.
In order for ESQUI® to become active, the application must be done on moist soil and sufficient precipitation or sprinkler irrigation must be applied after the application. Therefore, ESQUI® should be used if possible by following the rain precipitation or irrigation should be done with 20-30 cm sprinkler within 4 days after the application. ESQUI® or an herbicide with Fluometuron active substance should not be used more than once in the same field in a season. Care should be taken not to apply over and over.

OCTOBER WATCH:
If for any reason there is no cotton output, cotton can be planted again immediately. Winter wheat and barley can be planted after tillage as an alternation plant. Corn and peanuts can be applied 8 months after the ESQUI® application, soybeans and paddy after 9 months, and other crops after 12 months after tillage.

INFORMATION ON RESISTANCE:
The plant protection product named ESQUI® is a herbicide classified as Group C2,7 according to its mechanism of action. Repeated applications of plant protection products with the same mechanism of action encourage the development of resistance. For this reason, in order to delay the development of resistance, do not exceed the recommended total number of applications of ESQUI® in the same production season. In cases where the application needs to be repeated, pay attention to the use of plant protection products with different mechanism of action (except Group C2.7).

Compatibility: It is recommended to make premix trials before mixing large quantities for application.